Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Copying IOS to new Switch Not on Network

                   Hi all,

Need to confirm thing below

I have new switch and need to copy the IOS.

Switch is not connected to network.

I have tftp32 running on my laptop.

If i config the vlan on switch and say assign it IP address 10.1.1.2 Subnet mask 255.255.0.0

And  on PC i assign the IP statically from this Vlan range say 10.1.1.3  then PC should talk to switch means pingable?

IS this right way to transfer IOS if new switch is not on network?

Thanks

MAhesh

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Copying IOS to new Switch Not on Network

On your switch configure the Vlan as default gateway, so 10.1.1.1 255.255.255.0. On your PC configure static IP of 10.1.1.2 255.255.255.0 and make sure you enter the default gateway as 10.1.1.1. You will then be able to copy tftp flash from 10.1.1.2.

Kind Regards,

Kevin

**Please remember to rate helpful posts as well as mark the question as 'answered' once your issue is resolved. This will help others to find your solution faster.

Kind Regards, Kevin Sheahan, CCIE # 41349
2 REPLIES

Copying IOS to new Switch Not on Network

On your switch configure the Vlan as default gateway, so 10.1.1.1 255.255.255.0. On your PC configure static IP of 10.1.1.2 255.255.255.0 and make sure you enter the default gateway as 10.1.1.1. You will then be able to copy tftp flash from 10.1.1.2.

Kind Regards,

Kevin

**Please remember to rate helpful posts as well as mark the question as 'answered' once your issue is resolved. This will help others to find your solution faster.

Kind Regards, Kevin Sheahan, CCIE # 41349
New Member

Copying IOS to new Switch Not on Network

Hi Kevin,

Many thanks again

MAhesh

298
Views
0
Helpful
2
Replies
CreatePlease login to create content