And it especially does not make sense that configuration of HSRP on VLAN 10 should track VLAN 10.
ip address 172.20.0.253 255.255.255.0
standby 10 ip 172.20.0.254
standby 10 priority 115
standby 10 preempt
standby 10 track vlan 10
the purpose of track is that if the specified interface goes protocol down then you change your priority. But if VLAN 10 goes protocol down then it will not be possible for interface VLAN 10 to change its priority. If you are going to track interfaces you need to track something other than your own interface.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.