Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

could not expand chunk pool for ip nat mode. No Memory available - process="chunk Manager"

Hi,

One my clients 1841 Router giving following error on the Router, when i have checked after after seeing this error it may cause due to error some momory leak issue. Since its running almost newer version of IOS, can you please suggest which version IOS i can go ahead.

Router Version: c1841-advsecurityk9-mz.124-24.T8.bin

Thanks and Regard,

STN

  • LAN Switching and Routing
2 REPLIES

could not expand chunk pool for ip nat mode. No Memory available

The latest is 15.1.4M7 and that's a maintenance deployment. You could upgrade to it if you wanted (if you have enough flash space).

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***

Re: could not expand chunk pool for ip nat mode. No Memory avail

Hi,

I'm not sure if IOS update will solve your issue as error mentioned related to NAT.
I suspect a lot of internal hosts or machines are being translated.

Could you upgrade the router's RAM or temporarily add this global command?

ip nat translation timeout x

Issue a 'clear ip nat translation' and observe again.


Sent from Cisco Technical Support iPhone App

380
Views
0
Helpful
2
Replies
This widget could not be displayed.