Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CPU Utilization Log

Hi,

I have seen this type of log....Could any one please suggest me what should I do to avoid this type of error.

Feb 21 19:32:27.001 BHC: %SYS-5-CONFIG_I: Configured from console by nwadmin01 on vty0 (10.128.91.42)
Feb 21 20:02:50.887 BHC: %SYS-1-CPURISINGTHRESHOLD: Threshold: Total CPU Utilization(Total/Intr): 81%/47%, Top 3 processes(Pid/Util):  235/15%, 234/11%, 204/1%

6 REPLIES

Re: CPU Utilization Log

Hi,

This is auto snmp generated message.please check your snmp config or disable the logging console.

there is no big issue because of this message.

thanks & regards

karuppu

New Member

Re: CPU Utilization Log

Hi,

Thanks,

but tell me ...whats the meaning of utilization percentage, what is showing in the log.

I feared that, it goes to 75% utilization...

Re: CPU Utilization Log

%SYS-1-CPURISINGTHRESHOLD  just means that the system is experiencing high CPU usage, possibly because of a process that is using too much CPU and threshold has been reach for that process...

To find out what process is using the CPU, issue

show processes cpu | e 0.00%

New Member

Re: CPU Utilization Log

Thats meas its a serious issue, How do I trace what was the actual proccess going on, because of that the cpu utilization went high.. is there any process to fix this issue.  If any please help me.  This type of log i have seen few days 10 days back also.

Re: CPU Utilization Log

Not necessarily.

What Platform you have and IOS code?

New Member

Re: CPU Utilization Log

Hi,

The platform is 3750E, I am not sure which one is IOS code, please see the below line copied from sh ver.

Cisco IOS Software, C3750E Software (C3750E-UNIVERSAL-M), Version 12.2(50)SE3, RELEASE SOFTWARE (fc1)

3538
Views
0
Helpful
6
Replies