Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

create static route on 4506E to 7200 router

I'm having an issue where I can't create an ip address on a switch port for a firewall. I've done it before on a non-HA setup where the connection was made on the core switch directly connected to the router. This time the connection will be on a distribution-layer vtp client switch. There is a staticly-mapped subnet on the router to a virtual address. Every time I want to just create a port with IP Address, it fails why?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: create static route on 4506E to 7200 router

Earl,

Did you remeber to do a no switch port on that port to make a routed port?

HTH

Reza

1 REPLY
VIP Super Bronze

Re: create static route on 4506E to 7200 router

Earl,

Did you remeber to do a no switch port on that port to make a routed port?

HTH

Reza

276
Views
0
Helpful
1
Replies
CreatePlease to create content