Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

CS-4506 Switch and SSH access

Hi All

I am trying to configure ssh access to my 4506 switch.  Does anyone know which version image supports ssh because my present version does not seem to support it.  I cannot get the "sh crypto" or "sh rsa ... " commands going?

Thanks.

THANKSSWITCH#sh ver


Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(20)EWA1,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 20-Apr-05 14:35 by ccai
Image text-base: 0x00000000, data-base: 0x01224344

ROM: 12.2(20r)EW1
Dagobah Revision 226, Swamp Revision 34

THANKSSWITCH uptime is 2 years, 32 weeks, 5 days, 16 hours, 56 minutes
System returned to ROM by reload
System restarted at 23:06:07 NZST Mon Jul 9 2007
System image file is "bootflash:"

cisco WS-C4506 (MPC8245) processor (revision 10) with 262144K bytes of memory.
Processor board ID FOX090700Z0
MPC8245 CPU at 266Mhz, Supervisor II+
Last reset from Reload
8 Virtual Ethernet/IEEE 802.3  interface(s)
96 FastEthernet/IEEE 802.3 interface(s)
50 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

THANKSSWITCH#sh bootflash
-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- n
ame
1   .. image        2D397A09  C24218   30 12468632 Jun 25 2005 07:21:36 +12:00 c
at4000-i9s-mz.122-20.EWA1.bin

14794216 bytes available (12468760 bytes used)

3 REPLIES
VIP Super Bronze

Re: CS-4506 Switch and SSH access

Hello Sydney,

To support SSH you need an IOS image with k9 in the name

Here is an example for 4500

cat4500-ipbasek9-mz.122-53.SG1.bin

12.2(53) is the latest on CCO

HTH

Reza

New Member

Re: CS-4506 Switch and SSH access

Reza, thanks Buddy.  Much appreciated.

Sydney

Re: CS-4506 Switch and SSH access

Hi,


The current IOS which is running will not support ssh.

you need to upgrade your IOS into

Release            Feature Set/License                       Image Name                                                         DRAM       Flash

12.2(53)SG1    ENTERPRISE SERVICES SSH    cat4500-entservicesk9-mz.122-53.SG1.bin    256           64

Regards

Karuppu

2666
Views
0
Helpful
3
Replies
CreatePlease to create content