Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

CWDM SFP to SFP+

Presently we have 3 CWDM-MUX-4-SF1 chassis connecting three sites.

We are using 1000 SFP modules.  We would like to upgrade the connection speeds to 10 gig.  Can we do this with the hardware we have in place and upgrade just the SFP modules?  Or do we have to start from scratch?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

According to table-1 in this

According to table-1 in this link CWDM-MUX-4-SF1 is gig only.

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/cwdm-transceiver-modules/product_data_sheet0900aecd8029d01b.html

 

2 REPLIES
VIP Super Bronze

According to table-1 in this

According to table-1 in this link CWDM-MUX-4-SF1 is gig only.

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/cwdm-transceiver-modules/product_data_sheet0900aecd8029d01b.html

 

New Member

Thanks for the info!

Thanks for the info!

67
Views
0
Helpful
2
Replies
CreatePlease to create content