Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Data Port in IDSM

Does the data port # refer to the actual port # on the switch ports. With the following configuration could you please explain what does 'Gi3/2, Gi13/d1' display mean in 'show vlan id 661'

router# show run | include intrusion-detection

intrusion-detection module 13 management-port access-vlan 147

intrusion-detection module 13 data-port 1 access-vlan 661

intrusion-detection module 13 data-port 2 access-vlan 662

router# show vlan id 661

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

661 ward-attack3 active Gi3/2, Gi13/d1

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

661 enet 100661 1500 - - - - - 0 0

Remote SPAN VLAN

----------------

Disabled

Thanks

1 REPLY
New Member

Re: Data Port in IDSM

Does the data port 1 refer to sensing interface GigabitEthernet0/7 and data port 2 refer to sensing interface GigabitEthernet0/8 ?

98
Views
0
Helpful
1
Replies