Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

DC-DC power convertor failure

One 6509 suffers a power failure in module 3.And the error message is "%OIR-6-PWRFAILURE: Module 3 is being disabled due to power convertor failure

This message indicates that the DC-DC power convertor failed on the specified module."

Cisco's suggestion is " You need to replace hardware. "

I want to know if there is any other solutions for such problem.

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: DC-DC power convertor failure

Hi,

I hope that you are NOT looking forward fora Power Supply Module for 6509 which is from some vendor who is not Cisco?

You can simply place an order for a new Power Supply module by looking at the Part Number and talking to your local Cisco Partner

HTH

Regards.

Wilson Samuel

2 REPLIES

Re: DC-DC power convertor failure

Hi,

I hope that you are NOT looking forward fora Power Supply Module for 6509 which is from some vendor who is not Cisco?

You can simply place an order for a new Power Supply module by looking at the Part Number and talking to your local Cisco Partner

HTH

Regards.

Wilson Samuel

Community Member

Re: DC-DC power convertor failure

Hi,Wilson

It's really helpful.Thanks

Freedream

386
Views
0
Helpful
2
Replies
CreatePlease to create content