cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
5
Helpful
1
Replies

DCHP Snooping across multiple trunked switches.

jamesmpoplar
Level 1
Level 1

When implementing DHCP snooping on 2960 switches, if the switch sits "in the middle" of two other switches, such as there is an edge switch which is trunked to a middle switch that is finally trunked to another switch, do I have to set the two trunked ports on the "switch in the middle" to trusted to make sure all DHCP traffic goes from the core network to the edge switch?

It seems logical that this must be the way it has to be implemented throughout the network, but I want to make sure.

1 Accepted Solution

Accepted Solutions

kyawzawhtut
Level 1
Level 1

Hi

If you are enabling the dhcp snooping on all 3 switches including middle switch, you have to put the all the uplinks(or trunk links) and connection to dhcp server to be trusted.

HTH.

Cheers

Joe

View solution in original post

1 Reply 1

kyawzawhtut
Level 1
Level 1

Hi

If you are enabling the dhcp snooping on all 3 switches including middle switch, you have to put the all the uplinks(or trunk links) and connection to dhcp server to be trusted.

HTH.

Cheers

Joe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco