Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

debug event tools

Dear all,

Is there anyone know how to interpret some message/event from a debug mode?

For example I have enabled debug ip dhcp snooping events and packet and I receive every average second the message below, and want to know exactly what is mean this message:

Apr 13 16:48:19.290 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:48:19.290 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1

Apr 13 16:49:34.714 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:49:34.714 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1

Apr 13 16:49:36.559 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:49:36.568 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1

Apr 13 16:49:50.661 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:49:50.661 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1

Apr 13 16:49:55.241 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:49:55.241 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1
Apr 13 16:50:34.618 CEST: DHCP_SNOOPING: checking expired snoop binding entries

Apr 13 16:51:00.548 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was not set
Apr 13 16:51:00.548 CEST: DHCPSNOOP(hlfm_set_if_input): Clearing if_input for pak.  Was Gi1/0/1
Apr 13 16:52:01.048 CEST: DHCPSNOOP(hlfm_set_if_input): Setting if_input to Gi1/0/1 for pak.  Was

Thanks for your help

444
Views
0
Helpful
0
Replies
CreatePlease to create content