Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Define MTU SIZE PER INTERFACE

Dear good morning!

Please help-me if this is possible on me4000.

I have Switch Me-3400 with IOS 122-55.SE3. I need set mtu size on int f0/1 for 1600 and mtu size f0/24 to 1998.

Can I do this?

1 ACCEPTED SOLUTION

Accepted Solutions

Define MTU SIZE PER INTERFACE

As per the document It is possible.

But you need to try once.

Please rate the helpfull posts.

Regards,

Naidu.

5 REPLIES

Define MTU SIZE PER INTERFACE

Hi Silvio,

Configurable maximum transmission unit (MTU) of up to 9000 bytes, for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging and routing on Fast Ethernet ports for Cisco ME 3400 Series Ethernet Access Switches.

Please rate the helpfull posts.
Regards,
Naidu.

New Member

Define MTU SIZE PER INTERFACE

But Can I Define different value on interface f0/1 to 1600 and f0/24 to 1998 ?

Define MTU SIZE PER INTERFACE

As per the document It is possible.

But you need to try once.

Please rate the helpfull posts.

Regards,

Naidu.

New Member

Define MTU SIZE PER INTERFACE

Whats document?

Thanks

Define MTU SIZE PER INTERFACE

You can refer the following discussion.

https://supportforums.cisco.com/thread/247358

Please rate the helpfull posts.

Regards,

Naidu.

526
Views
0
Helpful
5
Replies