Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Dell San connectivity with switch

Hello Experts,
I configured dell san and connected with switch port for iscsi traffic. On dell, I can see the mtu value is by default set 9000 so please confirm if I need to do some other configuration on switch apart of VLAN and port assignment in same. Please provide any doc in this reference, if any.

Thanks

Sent from Cisco Technical Support iPhone App

3 REPLIES

Dell San connectivity with switch

What type of switch do you have? You may need to enable jumbo frames...

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
Community Member

Re: Dell San connectivity with switch

Cisco 4948 Switch L3

Sent from Cisco Technical Support iPhone App

Re: Dell San connectivity with switch

See if this post helps:

https://supportforums.cisco.com/thread/2066293

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
160
Views
0
Helpful
3
Replies
CreatePlease to create content