Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Destination Based NAT issues.

Hi,

Building 1 Server(172.16.10.2)

Building 2 User Subnets(10.10.10.x)

User Subnets(10.10.20.x)

As per the above mentioned, i have Building 1 wherein the server 172.16.10.2 is available.

In the Building 2 i have 2 subnet users 10.10.10.x and 10.10.20.x.Could some one give me a solution wherin subnet 10.10.10.x should be accessing the server IP as it is and subnet 10.10.20.x should be accessing the server IP through a Natted IP(192.168.10.1 instead of 172.16.10.2).I tried doing a destination based nat but then its affecting the 10.10.10.x users.Please share your thoughts.

Regards..Jkannan

1 REPLY
Hall of Fame Super Blue

Re: Destination Based NAT issues.

Hi Jkannan

Have a look at this document which uses route-maps to selectively do destination NAT.

Be aware you need at least 12.3(14)T IOS or later to be able to use this feature.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a008041d8ad.html

HTH

Jon

108
Views
0
Helpful
1
Replies