07-07-2013 04:48 AM - edited 03-07-2019 02:16 PM
Vlan 602 lan
10.202.41.128/27
usable range 10.202.41.129 - 10.202.41.190
usable range from 129 - .158
Vlan 603 wifi
10.202.41.160/27
usable range 10.202.41.161 - 10.202.41.189
I want to use the the range .159 - 189 under vlan 603
but exclude from 602 to avoid overlapping
How can I use " ip dhcp exclude " so that the range .159 - .189 gets excluded from vlan 602 only but allowed under vlan 603
Thanks
Solved! Go to Solution.
07-07-2013 09:47 AM
Hi,
valid IP host addresses in Vlan 602 are if it is a /27 :
10.202.41.129 - 10.202.41.158
and so Vlan 603 is not overlapping and the usable addresses are from .61 to .190
Regards
Alain
Don't forget to rate helpful posts.
07-07-2013 09:47 AM
Hi,
valid IP host addresses in Vlan 602 are if it is a /27 :
10.202.41.129 - 10.202.41.158
and so Vlan 603 is not overlapping and the usable addresses are from .61 to .190
Regards
Alain
Don't forget to rate helpful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: