Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP excluded address

Vlan 602 lan

10.202.41.128/27

usable range 10.202.41.129 - 10.202.41.190

usable range from 129 - .158

Vlan 603 wifi

10.202.41.160/27                                        

usable range 10.202.41.161 - 10.202.41.189

I want to use the the range .159 - 189 under vlan 603

but exclude from 602 to avoid overlapping

How can I use " ip dhcp exclude " so that the range .159 - .189 gets excluded from vlan 602 only but allowed under vlan 603

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

DHCP excluded address

Hi,

valid IP host addresses in Vlan 602 are if it is a /27 :

10.202.41.129 - 10.202.41.158

and so Vlan 603 is not overlapping and the usable addresses are from .61 to .190

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
1 REPLY
Purple

DHCP excluded address

Hi,

valid IP host addresses in Vlan 602 are if it is a /27 :

10.202.41.129 - 10.202.41.158

and so Vlan 603 is not overlapping and the usable addresses are from .61 to .190

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
147
Views
0
Helpful
1
Replies
CreatePlease login to create content