I configured the Router to a specific DHCP pool . I put also the default gateway, name server etc. After that i configured to exclude some specific range of addresses. But when i write show dhcp ip pool ... i can not see the excluded addresses. How can i find them . Do i have to remember them or write them down.
Both Rick and Ankur have provided the info to find the dhcp excluded address from the config.
To answer your specific question as to why the excluded address info doesn't show up with the 'show dhcp ip pool' command is because all the other values like network, default router, dns etc are configured under the dhcp pool mode whereas the excluded address is configured under the global config mode.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...