DHCP ip address assignement problem in cisco 3550 only for windows PC's
i have set up a cisco 3550 to act as dhcp server,also an OpenBSD which is also configured to act as dhcp server connected on same cisco 3550(but with different IP series).now the problem is when ever i switch off the OpenBSD, Cisco 3550 will be in a position to distribute the IP address to the windows PC's & Mac., but when the OpenBSD is ON, Cisco 3550 will distribute only to Macintosh PC's & not any , any reasons? my question is why it it distributing only to MAC & why not to windows?
Note: i have assigned static dhcp assigment in openBSD for few set of PC's & same in cisco 3550 for diff. set of few pc's. cisco 3550 conifugration for dchp is perfect & also in openBSD.
Re: DHCP ip address assignement problem in cisco 3550 only for w
it sounds like the OpenBSD box is stopping DHCP process from working. If a server has a DHCP scope without and IP's left it will respond to DHCP messages saying that it cannot assign an address. Could this be the problem? If you can put a sniffer on a Windows PC and see if you are actually getting and responce to DHCP requests.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...