ip dhcp excluded-address 192.168.0.1 192.168.0.9 ip dhcp excluded-address 192.168.0.16 ip dhcp excluded-address 192.168.0.20 ip dhcp excluded-address 192.168.0.26 ip dhcp excluded-address 192.168.0.31 192.168.0.34 ip dhcp excluded-address 192.168.0.38 ip dhcp excluded-address 192.168.0.50 ip dhcp excluded-address 192.168.0.100 192.168.0.254
ip dhcp pool Cisco network 192.168.0.0 255.255.255.0 default-router 192.168.0.100 dns-server 192.168.0.100 192.168.0.16 lease infinite update arp
well, you do have a lot of IP addresses excluded from the usable range, to be honest. If my calculations are correct, precisely 82 addresses can be used for hosts.
The next major problem is the lease time of infinite. That way, the bindings will never be flushed (if not done manually through the clear command or by restarting the router). What about trying the command I have provided in the previous post? For instance:
Router(dhcp-config)# lease 0 0 30
That way, the lease time will be set to 30 minutes. After that, it will age out dynamically.
How many hosts do you have on your network and why do you exclude so many addresses?
The router should go in the order, I believe, which addresses are skipped for example? Can you verify this by using show ip dhcp binding?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.