Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP pools for remote users

folks

i'm trying to set up several ip dhcp pools on a router to allocate ip addresses for a number ranges based on radius requests from an acs se (1113 4.1), i.e 8 pools & 8 ACS ranges

i've set up a pool on the router as a test and it works if the pool uses the same ip range as the fa0/0 interface

BUT the request won't be for the lan used by the fa0/0 interface - i need the dhcp addresses to be allocated to the remote clients not directly connectly ones

has anyone done this before - i only need to allocate an IP, don't need dns, domain etc

thanks to anyone taking the time to read this or reply

greatly appreciated

2 REPLIES
Hall of Fame Super Gold

Re: DHCP pools for remote users

On the LAN, try "ip helper-address ".

Cisco Employee

Re: DHCP pools for remote users

Hi,

So your remote client connect to the router via PPP and after the authentication, you want the ACS to send back to the router the pool name to use for the client IP address allocation.

If this is correct, you can find more information at the following link:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/u.html#wpxref13167

HTH

Laurent.

111
Views
0
Helpful
2
Replies