04-26-2012 06:25 AM - edited 03-07-2019 06:21 AM
please suggest on the below mentioned scenario ,
currently The network connectivity as fallows
1) connectivity ROUTER--- > L3 switch -- host machine
2) On L3 switch DHCP pool configured , all desktop connected to same switch
2) Router and L3 connected via OSPF dynamic routing protocol
3) Gate way for the desktop is switch VLAN 10 configured with IP 10.10.x.1 /24
changes :
1) Need to move desktop gateway ( 10.10.x.1) on the router LAN interface insted of Switch vlan 10.
2) the connectivity between router and Switch will be L2 ,
3) DHCP pool will be on the switch only , not on the router
4) default route will be configured on the switch towards router LAN interface ( 10.10.x.1/24)
In this scenario is DHCP works ( configuration mentioned below ) ?? .
On DHCP configuration "default-router 10.10.x.1 " for the DHCP scope . 10.10.x.1/24 currently on the switch
the desktop gateway address 10.10.x.1 will be moved to router LAN interface .
Is host machine will install gate way address ( through DHCP pool ) and able reach the gateway 10.10.x.1 ( router)
I think it should work since till router LAN interface its broadcast domain . please suggest .
Existing Switch configuration :
ip dhcp pool test
network 10.10.x.0 255.255.255.0
domain-name test.com
default-router 10.10.x.1
dns-server 10.20.x.1
lease 5
!
ip dhcp excluded-address 10.10.x.1 10.10.x.50
Interface vlan 10
ip address 10.10.x.1 255.255.255.0
Solved! Go to Solution.
05-01-2012 10:08 AM
05-01-2012 10:08 AM
lerner,
Your config will work.
Dan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide