07-01-2012 10:02 PM - edited 03-07-2019 07:33 AM
Hi,
I have a 2921 with 4 segments:
Let's say:
172.16.0.0/27 Gi0/1 (172.16.0.1)
172.16.2.0/23 Gi0/2 (172.16.2.1)
172.16.5.0/24 Gi0/3 (172.16.5.1)
172.16.10.0/26 Gi0/4 (172.16.10.1)
My DHCP server is 172.16.5.2 and I need to serve clients from 172.16.2.0/23 by MAC address and only to that segment.
I'm kind of very new with Cisco....
How can I do that?
Thank you!
Solved! Go to Solution.
07-02-2012 12:25 AM
Hi Adrian,
Go under interface gi0/2 and apply the config below:
ip helper-address 172.16.5.2.
This will relay all your dhcp request to that specified DHCP server. You will need to create a dhcp pool for that subnet on your DHCP server.
HTH.
Regards,
Terence
07-02-2012 12:25 AM
Hi Adrian,
Go under interface gi0/2 and apply the config below:
ip helper-address 172.16.5.2.
This will relay all your dhcp request to that specified DHCP server. You will need to create a dhcp pool for that subnet on your DHCP server.
HTH.
Regards,
Terence
07-03-2012 02:55 AM
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: