On a 4500 switch port , defined as access vlan 10, if the user connects his own dhcp server ( instead of the normal pc that should be connected ), will it cause issues with my existing network. the existing network is all static ip.
In above case, will the dhcp server start looking out and assign dhcp ip's , if a user unknowingly removes his static ip and changes to obtain ip via dhcp option on the lan properties.
You should put that one DHCP server in a different vlan and not mix it with your other users. So define vlan 10 for your users and vlan 11 for that one device (DHCP server). Make sure the IP address of that DHCP server in not the helper address in vlan 10. Another word, since your users are static, you should not have helper address in vlan 10.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.