Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DHCP server on Catalyst 2960X?

Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP server?  I did use the feature navigator and the answer seems to be no, but I wanted to get confirmation because I'm not sure I was using the tool correctly.  Thanks,  Mike
 

5 REPLIES

Helloapparently is canhttp:/

Hello

apparently is can

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_01101.html

 

Res

paul

Please don't forget to rate any posts that have been helpful. Thanks.
New Member

OK, so how do I confirm which

OK, so how do I confirm which software version supports this? 

"Your software release may not support all the features documented in this module."

I'd really like to know how I could confirm this info on my own using the feature navigator.

Thanks,  Mike

Hello what iOS are you

Hello 

what iOS are you currently using - that URL referenced 15.0 train

you could also try enabling it to test if it supported

 

config t

service dhcp

ip dhcp pool Test

If you find cisco navigator hard to use then maybe you could try using the support guides and check out the command references for your switch

http://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-command-reference-list.html
Please don't forget to rate any posts that have been helpful. Thanks.
Cisco Employee

Hello,

Hello,

Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP v6 server?

Thanks

Regards

Syamsul

New Member

According to the Cisco

According to the Cisco Feature Navigator the 2960X does not support this.  You could test for sure by trying to configure the feature.

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/15-2mt/ipv6-15-2mt-book/ip6-dhcp.html#GUID-D7BDF558-0F3D-473F-AF16-AC7AD8172778

3521
Views
0
Helpful
5
Replies
CreatePlease to create content