DHCP server on Catalyst 2960X?

[Mike Assel]

Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP server?  I did use the feature navigator and the answer seems to be no, but I wanted to get confirmation because I'm not sure I was using the tool correctly.  Thanks,  Mike
 

[paul driver]

Hello

apparently is can

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_01101.html

Res

paul

[Mike Assel]

OK, so how do I confirm which software version supports this? 

"Your software release may not support all the features documented in this module."

I'd really like to know how I could confirm this info on my own using the feature navigator.

Thanks,  Mike

[paul driver]

Hello 

what iOS are you currently using - that URL referenced 15.0 train

you could also try enabling it to test if it supported

config t

service dhcp

ip dhcp pool Test

If you find cisco navigator hard to use then maybe you could try using the support guides and check out the command references for your switch

http://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-command-reference-list.html

[sahim]

Hello,

Can anyone confirm for me whether or not the Catalyst 2960X can function as a DHCP v6 server?

Thanks

Regards

Syamsul

[Mike Assel]

According to the Cisco Feature Navigator the 2960X does not support this.  You could test for sure by trying to configure the feature.

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/15-2mt/ipv6-15-2mt-book/ip6-dhcp.html#GUID-D7BDF558-0F3D-473F-AF16-AC7AD8172778