Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dhcp snooping issues

Just want to know if there is any bug issues with a 2950 ver 12.1.

We are trying to PXE boot a server over the WAN the 2950 clientside has dhcp snooping enabled but when I take it away the client can PXE boot no problem!! any known issues?

2 REPLIES

Re: dhcp snooping issues

You must enable 'trusting' of the ports connected to both the DHCP server(s) and the RIS/ADS Server. This could be access ports directly to servers or the uplinks to a distribution/core switch.

interface GigabitEthernet0/1

ip dhcp snooping trust

This is something I have been testing today and sucessfully got this working after understanding how the conversations work.

HTH

Andy

New Member

Re: dhcp snooping issues

Hi Andrew,

Unfortunately my problem didn't get fixed that easily. It looks like this:

client1---2950switch2---3560switch1---WAN-MPLS---DHCP

I have "trusting" enabled on the trunks between the 2 switches and on the port connected to the WAN.

If I move the client to switch1 everything works perfectly, that's why I was wondering is ther any issues with the 2950 IOS and dhcp snooping?

Any more ideas what did you use in you tests?

Tyrone

342
Views
0
Helpful
2
Replies