04-14-2010 10:12 AM - edited 03-06-2019 10:37 AM
Hi,
We are using DHCP server, and on Switches 2960 and 3560 DHCP snooping is not enabled. Should we enabe the DHCP snooping, will it cause any performance issue. If the switches are operating with average traffic and utilization.
Please share the experience
Thanks
Subodh
Solved! Go to Solution.
04-14-2010 10:37 AM
Subdoh
As far as i know DHCP snooping is implemented in hardware on these switches so there should be minimal additional overhead on the main CPU. You do need to be aware of the limitations on the DHCP snooping binding database though because nvram and flash are limited, see the guidelines in the following link -
DHCP snooping configuration guidelines
Jon
04-14-2010 10:37 AM
Subdoh
As far as i know DHCP snooping is implemented in hardware on these switches so there should be minimal additional overhead on the main CPU. You do need to be aware of the limitations on the DHCP snooping binding database though because nvram and flash are limited, see the guidelines in the following link -
DHCP snooping configuration guidelines
Jon
04-14-2010 10:47 AM
Hi Subodh,
It should not cause any performance issues as the DHCP snooping contains the MAC address, IP address, lease time, VLAN info only for the local untrusted interface.
HTH
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide