Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

dhcp stopped working through C4506

users unable to connect to lan thru C4506 anymore.

no network / switchport changes made

switchports set to following:

spanningtree portfast

switchport mode access

vlan 1 is being used as default vlan

can ping dhcp server and rest of network

when users boot PC, they hang until network cable is unplugged. once they've logged in (cached credentials), network cable can be plugged back in and they work fine

issue is with this switch ONLY.....dhcp server shows no errors / events. all other users on other switches connected to same network have NO issues.

IOS: 12.2.18(EW) --- i know.....OLD. dont know if THIS would cause SUDDEN problem.

thx for any info.

3 REPLIES
Hall of Fame Super Bronze

Re: dhcp stopped working through C4506

Have you tried reloading the switch ?

Re: dhcp stopped working through C4506

Are you using dot1x?

Are you running DHCP snooping or ARP inspection?

New Member

Re: dhcp stopped working through C4506

Have you checked the log? Are all ports on the 4506 on the same vlan (vlan 1)?

143
Views
0
Helpful
3
Replies
CreatePlease to create content