Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP: Vendor Class Identifier

I need to replicate what is currently being done from a Windows server on a router with DHCP. Specifically, I need to set a class filter for vendor-class-identifier = "MSFT 5.0" and then set option 43 to 0x2B.

I haven't been able to find any examples on the net of how to set this up in IOS. Does anyone have any DHCP examples showing something similar?

2 REPLIES
New Member

Re: DHCP: Vendor Class Identifier

Does this help?

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml#t2

Basically, it looks to me like you need to do something like this:

ip dhcp pool MSFT

option 60 ascii "MSFT 5.0"

option 43 hex

New Member

Re: DHCP: Vendor Class Identifier

Thanks - that does help. After reading the RFC, I assumed it would be more complicated than that.

3009
Views
5
Helpful
2
Replies
CreatePlease to create content