Hi all,
I would like to test MS windows server 08 dhcpv6 stateful server but It (of course) doesn't work.
The client is in a subnet with a catalyst 3560 configured as a relay agent :
ipv6 enable
ipv6 nd managed-config-flag
ipv6 nd other-config-flag
ipv6 dhcp relay destination x:x:x:x::x Vlanx
I captured the trafic on both side and on the server + debug on the switch :
debug from the switch
03:07:12: IPv6 DHCP: detailed packet contents
03:07:12: src 2A01:690::2
03:07:12: dst 2A01:690:0:200::2 (Vlan100)
03:07:12: type RELAY-FORWARD(12), hop 0
03:07:12: link x:x::x
03:07:12: peer FE80::223:8BFF:FE67:5594
03:07:12: option RELAY-MSG(9), len 50
03:07:12: type SOLICIT(1), xid 13544762
03:07:12: option CLIENTID(1), len 14
03:07:12: 00010001117B122500242B44F8A0
03:07:12: option IA-NA(3), len 12
03:07:12: IAID 0x00000001, T1 4294967295, T2 4294967295
03:07:12: option ELAPSED-TIME(8), len 2
03:07:12: elapsed-time 3200
03:07:12: option ORO(6), len 2
03:07:12: DOMAIN-LIST
03:07:12: option INTERFACE-ID(18), len 5
03:07:12: 0x566C313030
03:07:12: option REMOTEID(37), len 22
I see the relay of the solicit msg coming on the interface of the server but I have no logs of any sort and no reply as well.
the client is running on windows xp with dibbler and ping works between server/relay relay/client and server/client
If anyone has already tried that seup any help would be welcome.
Thanks,