Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

dial up connection on router

hi,

how can i set up a dial up connection on router ?what all do i need for setting up this ?

regards

Neo

6 REPLIES

Re: dial up connection on router

can you explain little bit brief?

whether ur router wanted to dial the connection or the clients wanted to dial-in the router?

New Member

Re: dial up connection on router

Hi ,

I want to dial in router for changing the configuration of router.

regards

Neo

New Member

Re: dial up connection on router

Depends on if your router has an AUX port or not, check the document below and see if it answers your question:

http://www.cisco.com/warp/public/76/9.html

Re: dial up connection on router

Hi Neo,

very that your router has got AUX port, if so, from the console type "show line" & verify that type AUX is been displayed with the number eg. 65

router(config)#line 65

router(config-line)#modem inout

router(config-line)#speed 115200

router(config-line)#transport input all

router(config-line)#flowcontrol hardware

router(config-line)#login

router(config-line)#password 1234

hope this helps.

New Member

Re: dial up connection on router

Hi ,

You have any URL for this.

regards

Re: dial up connection on router

Hi,

this is the working configuration site which i hav done it for a test.

http://cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a0080093c31.shtml

hope your clear with this.

rate this post if satisfied

266
Views
3
Helpful
6
Replies