Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Different hardware version for WS-X6748-GE-TX and CEF

What Is different if we installed different hardware version for WS-X6748-GE-TX module and CEF card?

Will it have any impact to the network?

A#sh module

Mod Ports Card Type                                          Model           

--- ----- -------------------------------------- ------------------ -----------

  1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    

  2   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    

Mod MAC addresses                         Hw    Fw                Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  1  xxxx.xxxx.xxxx  to xxxx.xxxx.xx  1.10  12.2(14r)S5  12.2(18)SXF9 Ok
  2 xxxx.xxxx.xxxx  to xxxx.xxxx.xx    2.3   12.2(14r)S5  12.2(18)SXF9 Ok

Mod  Sub-Module                  Model                      Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  1  Centralized Forwarding Card WS-F6700-CFC      1.2    Ok
  2  Centralized Forwarding Card WS-F6700-CFC      2.0    Ok

1 REPLY
Bronze

Different hardware version for WS-X6748-GE-TX and CEF

Hardware version should not matter. 

Are you seeing any issues with this on 6500?

457
Views
0
Helpful
1
Replies