Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Digital Optical Monitoring on a cisco 4507

I installed a dom enabled cwdm sfp into my cisco 4507. Now i am receiving log messages

Jan 14 16:03:02 EST: %SFF8472-5-THRESHOLD_VIOLATION: Gi5/1: Temperature low warning; Operating value: -0.0 C, Threshold value: 0.0 C.

Jan 14 16:03:02 EST: %SFF8472-5-THRESHOLD_VIOLATION: Gi5/1: Rx power high alarm; Operating value: N/A dBm, Threshold value: -3.0 dBm.

Jan 14 16:03:02 EST: %SFF8472-5-THRESHOLD_VIOLATION: Gi5/1: Tx power high alarm; Operating value: N/A dBm, Threshold value: 8.0 dBm.

Jan 14 16:03:02 EST: %SFF8472-5-THRESHOLD_VIOLATION: Gi5/1: Voltage high alarm; Operating value: N/A, Threshold value: 3.60 V.

I understand that my cwdm sfp is not meeting the threshold, but how can i turn of digital optical monitoring (DOM)? I tried removing no snmp-server enable trap transceiver and there is no command called "no transceiver monitor all" in config mode.

1008
Views
0
Helpful
0
Replies
CreatePlease to create content