The Cisco 3900 Series uses symmetrical DIMM modules for increased performance, meaning that two identical DIMM modules must be installed into both DIMM slots at all times. By default, the Cisco 3925, 3925E, 3945, and 3945E ship with 1 GB of system DRAM consisting of two 512-MB DIMM modules. For the Cisco 2951, the default DRAM is 512 MB installed in a single DIMM slot. Any additional memory upgrades on the Cisco 2951 can be inserted into the second DIMM slot that is open and available.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...