Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable Express Setup on 2960

Hi All,

I inadvertently posted in WAN column. Is there a way to prevent erasing switch settings by holing in the MODE button? I would rather not give ability to an unsuspecting technician to nuke all my settings by holding in this button for 7 seconds.

thnx!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Disable Express Setup on 2960

In global config add the line:

no setup express

This doesn't prevent wiping the config through recovery though - i.e. holding the mode button whilst power cycling the switch and then going through the recovery procedure.

HTH

Andy

2 REPLIES

Re: Disable Express Setup on 2960

In global config add the line:

no setup express

This doesn't prevent wiping the config through recovery though - i.e. holding the mode button whilst power cycling the switch and then going through the recovery procedure.

HTH

Andy

New Member

Re: Disable Express Setup on 2960

Thanks much, Andy!

This is EXACTLY what I was looking for! I saw that command before, but thought it only was for invoking the express setup.

2493
Views
5
Helpful
2
Replies