Disable QoS configuration under interface

[alioune-ndiaye]

Hello guys,

I would like to know the consequences by disabling Qos under the follwing interface ( in production environment)

#show mls qos interface gigabitethernet 3/0/31 queueing
GigabitEthernet3/0/31
Egress Priority Queue : enabled
Shaped queue weights (absolute) :  25 0 0 0
Shared queue weights  :  10 10 60 20
The port bandwidth limit : 100  (Operational Bandwidth:100.0)
The port is mapped to qset : 2

Do I get any outage?

Thank you for helping.

Alioune

[Dan-Ciprian Cicioiu]

Hi Alioune,

As far as I know there is no way you can disable SRR (qos). The qos  is enabled globaly, and you can tune it per interface (shape/share).

Regards

Dan

[alioune-ndiaye]

Hello

Dan-Ciprian Cicioiu,

Thank you for your response.

I have 2 questions

1- What is if I disable global QoS in live production?

2- these values are default or not?

Shaped queue weights (absolute) :  25 0 0 0

Shared queue weights  :  10 10 60 20

Thx

Alioune

[Dan-Ciprian Cicioiu]

Hi,

I do not think that will be no traffic distruption.

As far as I know, and checked , this are not the default values for the shared qos

Regards

Dan