Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable stackwise - 3750

Can someone please help me disable the stackwise config in a 3750 switch. I have removed the switch from a stackwise configuration and need it as a standalone.

When I run the command...

no switch [#] provision

...I get the error...

%IDBs can not be removed when switch is active.

I see some documentation that mentioned renumbering the switch. However, once I renumber it I get the same error.

----------------------------------------

version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Switch

!

no aaa new-model

switch 1 provision ws-c3750-48p

----------------------------------------

I am starting to wonder if it is even possible to remove the default switch 1 config when you have stackwise ports??? Any ideas? Thanks!!!

1 REPLY
New Member

Re: Disable stackwise - 3750

I don't have one in front of me to confirm, but I believe this is default config. Do a show switch and if only one switch exist, you can't remove it.

If you do a switch 2 provision (model), then do a show run, you will be able to provision the ports that don't exist until the switch is phyically connected.

hope this helps,

Aaron Magruder

NonStop Networks, LLC

http://www.nonstopnetworks.net

1810
Views
0
Helpful
1
Replies
CreatePlease to create content