Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable the mode option on the switch

I have a 2960G switch I would like to disable the mode option on the switch how can I do that?

4 REPLIES

Re: Disable the mode option on the switch

"mode option?"

HTH, John *** Please rate all useful posts ***

Re: Disable the mode option on the switch

I assume you mean the 'mode' button on the front of the switch that allows you to cycle though the port status, speed, duplex and PoE? If that's the case it can't be disabled for this function, however you can disable the feature where the switch will reset to defaults if the button is pressed for 10-seconds using the commands 'no setup express'

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_44_se/command/reference/cli2.html#wp8240764

HTH

Andy

New Member

Re: Disable the mode option on the switch

Thx a lot for your help

New Member

Re: Disable the mode option on the switch

HI Shane McAnuff

appretiate if you rate the post if it helps.

Ullas

149
Views
0
Helpful
4
Replies