Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Disablelling inter vlan communication

we have 3560 L3 switch & several 3500 L2 switches.But i want to disable inter vlan communication while maintaining the communication with 3560 and my router also.

4 REPLIES

Re: Disablelling inter vlan communication

Hi,

If you want disable intervlan routing you must use "no ip routing".

An interesting link is :http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml

I hope this helps.

Best regards.

Massimiliano.

Re: Disablelling inter vlan communication

hi massimilano,

If the no ip routing command is used then i am afraid that the 3560 will become an L2 switch and no routing will be done.

Removing default gateway on 3500 will also cause some problems as we dont know exact topology and config.

If you just want to disable intervlan routing but want to reach internet then try using ACLS.

HTH,

regards,

shri :)

Community Member

Re: Disablelling inter vlan communication

Thanks a lot.

regards,

Parba Basu

Bronze

Re: Disablelling inter vlan communication

You'll have to use some form of access list somewhere. Once the packet hits a router its going to go where its going to go unless you do something to stop it.

183
Views
0
Helpful
4
Replies
CreatePlease to create content