Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Disabling / Enabling a port

Noob alert!! How do I go about disabling / enabling a port on a 3560?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Disabling / Enabling a port

Sw#conf t

Sw(config)#interface F0/4

Sw(config-if)#shut

Sw(config-if)#end

Sw#

Sw#conf t

Sw(config)#interface F0/4

Sw(config-if)#no shut

Sw(config-if)#end

Sw#

Kevin Dorrell

Luxembourg

9 REPLIES
Green

Re: Disabling / Enabling a port

config t

int fax/x

shutdown

config t

int fax/x

no shutdown

Re: Disabling / Enabling a port

Sw#conf t

Sw(config)#interface F0/4

Sw(config-if)#shut

Sw(config-if)#end

Sw#

Sw#conf t

Sw(config)#interface F0/4

Sw(config-if)#no shut

Sw(config-if)#end

Sw#

Kevin Dorrell

Luxembourg

New Member

Re: Disabling / Enabling a port

Thanks Kevin. One more question how do i do it on a 6509?

Green

Re: Disabling / Enabling a port

same way...

Hall of Fame Super Blue

Re: Disabling / Enabling a port

As Adam says if the 6500 supervisor is running IOS then the same way.

If it is running CatOS

6500# set port disable 2/4

6500# set port enable 2/4

where 2/4 would be the 4th port on module 2 in the 6500 chassis.

Jon

New Member

Re: Disabling / Enabling a port

If I want to see all the mac-address on a 6509 (not the port addresses but the computer addresses that are connected to the 6509 what is the command?

I tried sh port mac-address 4 but that gave me all the port mac-addresses and not the computers. Help..

Re: Disabling / Enabling a port

Hi,

For 6500 with CatOS you will need

6500# show cam dynamic

to display all mac addresses

and

6500# show cam dynamic 6/20

to display the mac address on module 6 on port 20

yes-----

you can filter the Vlans as for Vlan 6 type

6500# show cam dynamic 6

HTH

Shaheen

New Member

Re: Disabling / Enabling a port

Is there a way to filter by vlan so i don't see all my 500+ mac addresses?

Re: Disabling / Enabling a port

Hi,

I have already answered in my above email. please try and update us if it has worked ?

HTH

Shaheen

154
Views
0
Helpful
9
Replies
CreatePlease to create content