Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Disabling multiple ports on a 3650 Switch

Hi,

I have a 48 ethernet port switch with 4 gig interfaces and i want to disable all the ethernet ports (1-48). Is there a way i can do this with one command? when im in cofigure terminal mode i dont know how i can select a range of interfaces as opposed to just one interface. Pls Help.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Disabling multiple ports on a 3650 Switch

Hi

Try

switch(config)# interface range fa0/1 - 48

switch(config-if-range)# shut

Make sure you have spaces between the interfaces ie

interface range fa0/1"space"-"space"48

HTH

Jon

3 REPLIES
Hall of Fame Super Blue

Re: Disabling multiple ports on a 3650 Switch

Hi

Try

switch(config)# interface range fa0/1 - 48

switch(config-if-range)# shut

Make sure you have spaces between the interfaces ie

interface range fa0/1"space"-"space"48

HTH

Jon

New Member

Re: Disabling multiple ports on a 3650 Switch

Thanks champ that worked

New Member

Re: Disabling multiple ports on a 3650 Switch

use the following command

interface range g0/1-48

11309
Views
0
Helpful
3
Replies
CreatePlease to create content