Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Displaying contributing routes for aggregate (IOS XR)

Hi,

 

I have simple configuration where I conditionally generate aggregate route based on some route-policy:

 

router bgp 65001

 vrf TEST-A
  rd 172.16.10.102:103
  address-family ipv4 unicast
   aggregate-address 0.0.0.0/0 route-policy RP-TEST

when I display this route I see:

RP/0/0/CPU0:HOST-A#show route vrf TEST-A 0.0.0.0/0 detail

Routing entry for 0.0.0.0/0
  Known via "bgp 65001", distance 200, metric 0, candidate default path, type locally generated
  Installed Nov 10 10:18:17.634 for 01:32:09
  Routing Descriptor Blocks
    directly connected, via Null0
      Route metric is 0
      Label: None
      Tunnel ID: None
      Extended communities count: 0
      NHID:0x0(Ref:0)
  Route version is 0xf (15)
  No local label
  IP Precedence: Not Set
  QoS Group ID: Not Set
  Route Priority: RIB_PRIORITY_RECURSIVE (10) SVD Type RIB_SVD_TYPE_LOCAL
 Download Priority 3, Download Version 9354
  No advertising protos.

 

How can I verify, which routes are used as contributing routes to generate my aggregate route? I simply would like to verify, if my policy properly selects the routes I want.

 

57
Views
0
Helpful
0
Replies