distance commands parameter

[zeeshanr202]

hi every body

i have a question regarding " distance"

command. here is the sample configuration

router ospf 1

network 10.0.0.0

distance 145 10.10.10.1 0.0.0.255 3

!

access-list 3 permit 2.0.0.0

in the above configuration " 10.10.10.1"

is router id supplying the routing information or the ip address of an interface supplying the information?

thanks

[royalblues · Accepted solution]

For OSPF, the IP address and address mask entered for the distance command should match the source address and address mask of the OSPF router that sent the link-state advertisement (LSA).

The OSPF router would be the router ID

HTH

Narayan