It's been awhile, is your answer still true? I set this up in a lab I have at home and it appears to work. While I don't have any SNA boxes to really test it, the DLSw peers do connect and if I cause an HSRP failover, the "new" peer connects after about 20 - 30 seconds and the old one times out after about 1 minute. I am running 12.3 on the 3640s I have set up as HSRP peers. Maybe the newer IOS version enabled something to work that didn't in earlier versions?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...