05-27-2009 03:05 AM - edited 03-06-2019 05:57 AM
hello!
I need to reconfigure DMZ (several external servers) on ISR2811.
I kindly request for design scenarios, configuration guides for DMZ (best with ISA server in LAN) on cisco.com or other.
thanks in advance.
06-02-2009 06:03 PM
Here is a configuration for a DMZ ,,,
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
ip address x.x.x.x 255.255.255.y
!
access-list dmz_access_in extended permit icmp any any
!
access-list DMZ_nat0_outbound extended permit ip x.x.x.0 255.255.255.y any
!
access-list DMZ_access_in extended permit tcp any any eq domain
access-list DMZ_access_in extended permit tcp any any eq hostname
!
mtu DMZ 1500
!
access-group DMZ_access_in in interface DMZ
06-05-2009 02:54 AM
thanks for You request but I need a concept scenario, how propertly design DMZ.
configuration exapmles are secondary matters.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: