Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Do not show useless logging,such as DAI That is too much.

Hi,

I ask a question,I show logging in a switch ,In this switch, there are much more logging, I would like to filter these logging, such as the following ARP DAI logging ,Is there  a  way to deny DAI logging.

   

NO40-WAIWANG-HX#show logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes,
0 overruns)
    Console logging: level debugging, 226333 messages logged
    Monitor logging: level debugging, 0 messages logged
    Buffer logging: level debugging, 226334 messages logged
    Exception Logging: size (8192 bytes)
    Count and timestamp logging messages: disabled
    Trap logging: level informational, 226339 message lines logged

Log Buffer (2000000 bytes):

*Jul 30 17:00:47: %SW_DAI-4-DHCP_SNOOPING_DENY: 1 Invalid ARPs (Req) on Gi3/8, v
lan 3.([001b.7817.579a/10.224.0.87/0501.0201.0401/10.224.0.166/17:00:46 UTC Tue
Jul 30 2013])
*Jul 30 17:04:09: %SW_DAI-4-DHCP_SNOOPING_DENY: 1 Invalid ARPs (Req) on Gi3/8, v
lan 3.([0021.cc62.435a/0.0.0.0/0000.0000.0000/10.224.0.193/17:04:09 UTC Tue Jul
30 2013])
*Jul 30 17:04:10: %SW_DAI-4-DHCP_SNOOPING_DENY: 1 Invalid ARPs (Req) on Gi3/8, v
lan 3.([0021.cc62.435a/0.0.0.0/0000.0000.0000/10.224.0.193/17:04:10 UTC Tue Jul
30 2013])
*Jul 30 17:04:11: %SW_DAI-4-DHCP_SNOOPING_DENY: 1 Invalid ARPs (Req) on Gi3/8, v
lan 3.([0021.cc62.435a/0.0.0.0/0000.0000.0000/10.224.0.193/17:04:11 UTC Tue Jul
30 2013])

too more .......

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Do not show useless logging,such as DAI That is too much.

Try this:

logging discriminator DAI mnemonics drop SW_DAI-4-DHCP_SNOOPING_DENY

logging buffered discriminator DAI 4096

logging monitor  discriminator DAI

logging console  discriminator DAI

11 REPLIES
Hall of Fame Super Gold

Do not show useless logging,such as DAI That is too much.

Try this:

logging discriminator DAI mnemonics drop SW_DAI-4-DHCP_SNOOPING_DENY

logging buffered discriminator DAI 4096

logging monitor  discriminator DAI

logging console  discriminator DAI

New Member

Do not show useless logging,such as DAI That is too much.

Thank you very much!

Hall of Fame Super Gold

Do not show useless logging,such as DAI That is too much.

Happy to see it works. 

New Member

I tried did not work this

I tried did not work this command

logging discriminator DAI mnemonics drop SW_DAI-4-DHCP_SNOOPING_DENY

logging buffered discriminator DAI 4096

logging monitor  discriminator DAI

logging console  discriminator DAI

Hello,

Hello,

what switch type(s) and IOS do you have?

Regards
Rolf

New Member

cat 4500

cat 4500

ystem image file is "bootflash:cat4500es8-universalk9.SPA.03.07.01.E.152-3.E1.b                                                                                                                                                             in"

this one

Please have a look at the

Please have a look at the linked bug and release notes in this discussion.

HTH
Rolf

New Member

Do not show useless logging,such as DAI That is too much.

Good day.

Try to read this tread -

https://supportforums.cisco.com/thread/2038440

New Member

Do not show useless logging,such as DAI That is too much.

Thank you very much! but This is switch !

Hall of Fame Super Silver

Do not show useless logging,such as DAI That is too much.

Leo's method is the best. It uses the Embedded Syslog Manager feature present in more recent IOS versions.

Here is a comprehensive reference guide.

Hall of Fame Super Gold

Do not show useless logging,such as DAI That is too much.

Thanks for the endorsement, Marvin.

584
Views
0
Helpful
11
Replies