Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Do you get anything out fromthis???

Hi All,

Do get any output from this, what it is and what status failed?

State Transition: From Normal To Failed

Time Of State Transition: 2009-03-22 00:36:34

Probe(s): 192.168.0.204

Scandetails:

Notification: 0

Notification Activated: 2009-03-22 00:36:34

Notification Sent: 2009-03-22 00:36:58

AcknowledgementTime: [Not Acknowledged]

AcknowledgementUser: [Not Acknowledged]

ActiveProfile: 6500

AllDeviceNotes: No device note for device 6500

ConfigurationParameters: Scan Interval: 5

null: 0

null: sysUpTime

null: 1.3.6.1.2.1.1.3

Index:

null: ifDescr

Interface: GigabitEthernet1/1

null: 1.3.6.1.2.1.2.2.1.2

null: ifSpeed

null: 1.3.6.1.2.1.2.2.1.5

null: ifInOctets

null: 1.3.6.1.2.1.2.2.1.10

null: ifOutOctets

null: 1.3.6.1.2.1.2.2.1.16

null: TRAF_UPTIME1

null: _sysUpTime 100 /

null: UINT32

null: TRAF_BYTESIN1

null: _ifInOctets

null: UINT32

null: TRAF_BYTESOUT1

null: _ifOutOctets

null: UINT32

null: TRAF_UPTIME2

null: $sysUpTime 100 /

null: UINT32

null: TRAF_BYTESIN2

null: $ifInOctets

null: UINT32

null: TRAF_BYTESOUT2

null: $ifOutOctets

null: UINT32

null: TRAF_BYTES

null: $ifInOctets $ifOutOctets +

null: UINT64

null: TRAF_BYTESPERSEC

null: ^ifInOctets ^ifOutOctets + 100 * ^sysUpTime /

null: UINT64

null: TRAF_BYTESINPERSEC

null: ^ifInOctets 100 * ^sysUpTime /

null: UINT64

null: TRAF_BYTESOUTPERSEC

null: ^ifOutOctets 100 * ^sysUpTime /

null: UINT64

null: TRAF_UTIL

null: ^ifInOctets ^ifOutOctets + 80000 * ^sysUpTime $ifSpeed * /

null: PERCENT

DeviceDescription: [empty]

DeviceIP: 192.168.30.92

DeviceProperty: <device property not found>

LastDeviceNote: No device note for device 6500

NotificationProfileName: 6500

NumericState: 300

QualitativeNewStatus: Task Monitoring - Normal

QualitativeOldStatus: Task Monitoring - Normal

QuantitativeNewState:

QuantitativeOldState:

Previous System Uptime Measurement: 1764309

Previous Incoming Bytes Measurement: 3894356274

Previous Outgoing Bytes Measurement: 3586773038

System Uptime: 1764608

Total Incoming Bytes: 3912724597

Total Outgoing Bytes: 3776282027

Total bytes since boot: 7689006624

Total bytes per second: 695358

Incoming bytes per second: 61443

Outgoing bytes per second: 633915

Utilization: 1

TaskName: <Task property not found>

TaskIdent: GigabitEthernet1/1

Thank you,

2 REPLIES
Hall of Fame Super Gold

Re: Do you get anything out fromthis???

Is this an SNMP walk?

Community Member

Re: Do you get anything out fromthis???

Yes. What other info do see from here. CAn you please help out on this?

Thank you,

143
Views
0
Helpful
2
Replies
CreatePlease to create content