Re: do you guys know how i can configure a "cisco catalyst 3560G
Hi dinchavan, VMPS Server feature is supported only Catalyst 6500 series with CatOS images, so you can't use it.
The only way the assignment of VLAN dynamically after IEEE 802.1x authentication. But CE500 platforms only support IEEE 802.1x authentication, they don't support Dynamic VLAN assignment via IEEE 802.1x. Catalyst 3560G support IEEE 802.1x with dynamic VLAN assignment. As a result, assuming you use CE500s as edge switches, you can't do it by using these equipments.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...