04-14-2010 08:33 PM - edited 03-06-2019 10:37 AM
002750: Apr 15 12:22:35.675 CST: %PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_LOOKUP_CMD
04-14-2010 08:34 PM
sorry there was more
002749: Apr 15 12:22:35.531 CST: %PLATFORM_CAT2950-3-SCHAN_OP_FAILURE:
S-channel operation timeout for opcode ARL_LOOKUP_CMD
cmic_schan_op ERROR: timeout (OP=0x19 polls=100000)
04-14-2010 08:41 PM
04-14-2010 08:47 PM
04-14-2010 08:56 PM
%PLATFORM_CAT2950-3-SCHAN_OP_FAILURE: S-channel operation timeout for opcode [chars].
This message means that there was a failure to read or write to an ASIC register or a memory location because of an ASIC internal bus failure. [chars] is the operation code.
Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative, and provide the representative with the gathered information.
Related documents- No specific documents apply to this error message.
01-18-2012 11:17 PM
Go to:
and look for bug CSCee32179. Apparently it is cosmetic only, and can be avoided by not using the features:
switchport port-security aging time
switchport port-security aging type inactivity
Hope this helps
Kevin Dorrell
CCIE #20765
Luxembourg
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: