Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Does WS-X4013 Sup support WS-X4424-GB-RJ45 in 4003 chassis?

Hi,

for an small test environment we plan to use a 4003 chassis with a Sup2 and a WS-X4424-GB-RJ45 line card.

Does anybody know if this is supported?

Best Regards,

Thorsten Steffen

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Does WS-X4013 Sup support WS-X4424-GB-RJ45 in 4003 chassis?

Yes, it is supported. You need a minimum of 6.3(1) Cat OS on Sup engine II.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/release/note/OL_4502.html

HTH,

-amit singh

1 REPLY
Cisco Employee

Re: Does WS-X4013 Sup support WS-X4424-GB-RJ45 in 4003 chassis?

Yes, it is supported. You need a minimum of 6.3(1) Cat OS on Sup engine II.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/release/note/OL_4502.html

HTH,

-amit singh

230
Views
0
Helpful
1
Replies
CreatePlease to create content